{"product_id":"b2b_gras1052","title":"Hawk 12 HoTT - 2.4 GHz receiver","description":"\u003cp\u003eWith the Hawk 12, Graupner presents a powerful 6-channel receiver with integrated 3-axis gyro and particularly vibration-insensitive 3-axis acceleration sensor, diversity antennas, vario and attitude mode for fixed-wing models or rescue mode and attitude mode for helicopters.\u003cbr\u003e\u003cbr\u003eWith GRAUPNER HoTT 2.4GHz technology, the receiver has a secure hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. The receiver transmits the parameters \"receiver voltage\", \"receiver temperature\", \"signal strength\", \"altitude\", \"altitude difference (vario)\" to the transmitter without additional sensors. It is also possible to transmit the Euler angles to the transmitter and display them there.\u003cbr\u003e\u003cbr\u003eThe antenna amplifier together with the antenna diversity ensures an enormous range. The faster 32-bit L4 processor guarantees energy-saving operation and the higher performance ensures that the Hawk 12 can also be used as a flybarless system for helicopters and as a flight controller for copters. Of course, the integrated Hawk gyro system can also be used perfectly for fixed-wing models. There are 4 different gyro modes: OFF, normal stabilization, heading lock, gyro rate mode and attitude mode. When set correctly, the gyro rate mode enables knife-edge flight and torquing without control corrections. Extremely quick, easy and convenient to set via the Hott transmitter telemetry menu.\u003cbr\u003e\u003cbr\u003eJust like its namesake, the falcon, the Hawk 12 embodies determination, power and precision. Go on the hunt for the perfect flight with the Hawk.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWing models\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e    Stabilization of the flight model in difficult wind conditions for up to 3 axes\u003c\/li\u003e\r\n\u003cli\u003e    Natural flight behavior due to proportional gyro suppression\u003c\/li\u003e\r\n\u003cli\u003e    The 3-axis gyro means that even difficult-to-control aerobatic models can be flown very smoothly and aerobatics are extremely simplified\u003c\/li\u003e\r\n\u003cli\u003e    Flight figures can be flown much more cleanly\u003c\/li\u003e\r\n\u003cli\u003e    4 different gyro modes: OFF, normal stabilization, heading lock, turn rate mode for particularly easy knife-edge flight and simple torquing as well as attitude mode\u003c\/li\u003e\r\n\u003cli\u003e    Simple setting of the gyro assignment\u003c\/li\u003e\r\n\u003cli\u003e    Parameter setting via HoTT telemetry\u003c\/li\u003e\r\n\u003cli\u003e    Software with attitude mode enables easy landings even in difficult wind conditions\u003c\/li\u003e\r\n\u003cli\u003e    5 free mixers\u003c\/li\u003e\r\n\u003cli\u003e    SUMD output for connection to flybarless systems, flight controllers or a power box.\u003c\/li\u003e\r\n\u003cli\u003e    SUMDIN input for redundant receiver operation.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFlybarless system for helicopters\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e    Rescue mode and attitude mode for helicopters\u003c\/li\u003e\r\n\u003cli\u003e    Basic setting completed in just a few minutes via HoTT telemetry\u003c\/li\u003e\r\n\u003cli\u003e    Fast and innovative axis assignment for flexible installation direction\u003c\/li\u003e\r\n\u003cli\u003e    Extremely space-saving due to size, weight and elimination of cables, making it easy to store\u003c\/li\u003e\r\n\u003cli\u003e    Special vibration-resistant 3-axis sensors of the latest generation\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate pirouette optimization and direction of tail torque compensation are detected automatically\u003c\/li\u003e\r\n\u003cli\u003e    All common heli swashplates 90\/120\/135\/140 degrees and 90 degrees 4 servos\u003c\/li\u003e\r\n\u003cli\u003e    Adjustable swashplate rotation up to 90 degrees for multi-blade heads\u003c\/li\u003e\r\n\u003cli\u003e    Clear standard menu and selectable expert menu if required\u003c\/li\u003e\r\n\u003cli\u003e    Sensitivity parameters can also be adjusted during flight to speed and style depending on flight phase via encoder\u003c\/li\u003e\r\n\u003cli\u003e    Super-fast due to elimination of transmission time from receiver to flybarless system\u003c\/li\u003e\r\n\u003cli\u003e    Very direct control feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eProgramming for helicopters\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e    Simple programming of the basic settings via telemetry.\u003c\/li\u003e\r\n\u003cli\u003e    Pirouette optimization is determined automatically from the parameters and works extremely well.\u003c\/li\u003e\r\n\u003cli\u003e    Extreme flight stability with full 3D capability even with the basic settings.\u003c\/li\u003e\r\n\u003cli\u003e    The effect for the tail and swashplate can be easily set via the telemetry menu or via selectable encoders.\u003c\/li\u003e\r\n\u003cli\u003e    Further optimization options in expert mode for personal flying style and personal requirements.\u003c\/li\u003e\r\n\u003cli\u003e    Extremely simple adjustment of the basic settings via telemetry:\u003c\/li\u003e\r\n\u003cli\u003e    Rotor rotation direction\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate type\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate frequency 50...200 Hz\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate direction\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate servo centers Servo 1...3 (4)\u003c\/li\u003e\r\n\u003cli\u003e    Set swashplate cycl. travel to 8°\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate pitch travel A\/B\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate limit\u003c\/li\u003e\r\n\u003cli\u003e    Swashplate rotation\u003c\/li\u003e\r\n\u003cli\u003e    Tail servo center pulse 760µs, 960µs, 1.5 ms\u003c\/li\u003e\r\n\u003cli\u003e    Tail servo frequency 50...333 Hz\u003c\/li\u003e\r\n\u003cli\u003e    Tail servo center position\u003c\/li\u003e\r\n\u003cli\u003e    Rescue pitch\u003c\/li\u003e\r\n\u003cli\u003e    Expo yes\/no\u003c\/li\u003e\r\n\u003cli\u003e    Logging for service purposes or for the Euler angle display\u003c\/li\u003e\r\n\u003cli\u003e    Expert mode yes\/no\u003c\/li\u003e\r\n\u003cli\u003e    Simple gyro axis assignment\u003c\/li\u003e\r\n\u003cli\u003e    Gyro effect for tail and swashplate via telemetry or adjustable encoders.\u003c\/li\u003e\r\n\u003cli\u003e    Additional parameters can be set in expert mode.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFlight control for copters\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e    Copter software Q07 with Dshot controller protocol can be loaded via software update\u003c\/li\u003e\r\n\u003cli\u003e    Basic setup completed in just a few minutes via the telemetry menu\u003c\/li\u003e\r\n\u003cli\u003e    Fast and innovative axis assignment for flexible installation direction\u003c\/li\u003e\r\n\u003cli\u003e    Special vibration-resistant 3-axis sensors of the latest generation\u003c\/li\u003e\r\n\u003cli\u003e    The housing protects the electronics in the event of a crash. The special double-sided adhesive tape additionally dampens vibrations.\u003c\/li\u003e\r\n\u003cli\u003e    8kHz gyro frequency, multishot and fast PID control routines as well as new software filters ensure a perfect flying experience.\u003c\/li\u003e\r\n\u003cli\u003e    D-Shot with turtle mode.\u003c\/li\u003e\r\n\u003cli\u003e    Quadrotype XI (Quadrocopter X with reverse prop rotation direction), which has proven itself especially in FPV races, so that the lens remains clear and the props turn away from the obstacle.\u003c\/li\u003e\r\n\u003cli\u003e    When the S8437 GPS sensor is connected to K5\/Telemetry and K5 is set to SENSOR, the functions are also available: Hold GPS with altitude hold, Come home and Fly waypoints (with HoTT Viewer app and USB OTG cable) are available.\u003c\/li\u003e\r\n\u003cli\u003e    Telemetry support for own Hott sensors and Hott sensors from other providers\u003c\/li\u003e\r\n\u003cli\u003e    SUMD output for other flybarless receivers.\u003c\/li\u003e\r\n\u003cli\u003e    SUMDIN input for redundant receiver operation.\u003c\/li\u003e\r\n\u003cli\u003e    Voltage input for external voltage divider, e.g. already included in the S3082 and S3083 controllers.\u003c\/li\u003e\r\n\u003cli\u003e    Suitable for HV. Input voltage range 3.6...8.4 V\u003c\/li\u003e\r\n\u003cli\u003e    Can be programmed and operated with all previously available HoTT transmitters with telemetry\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Graupner","offers":[{"title":"Default Title","offer_id":51966728470875,"sku":"GRAS1052","price":191.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/7348\/6171\/files\/GRAS1052.jpg?v=1767037541","url":"https:\/\/www.rcleo.com\/fr\/products\/b2b_gras1052","provider":"RCLeo.com","version":"1.0","type":"link"}