Krick Dumas DH-4 Park Flyer R/C Kit 889mm Span # DS1812 ***

EAN 4025792134142

DH-4 Park Flyer R/C Kit from DUMAS
Here is a beautiful model of the DH-4, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.

Kit features:
Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue

This is the radio controlled, electric powered DH-4 Park Flyer Kit.


FEATURES

Construction: Hand selected laser cut balsa
Vacuum molded cowl
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid
requires bending


INCLUDES

All balsa, lightweight colored (blue and yellow) tissue covering, two 2" (51mm) diameter plastic main wheels, tail wire skid, CA hinges and all hardware to comlete the kit, instruction manual, two full-size plan sheets, and vacuum molded cowling.


REQUIREMENTS

GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment


SPECIFICATIONS

Length: 25" (635mm)
Wingspan: 35" (889mm)
Wing Area: 329sq.in. (22.74 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-13/16" (46mm) back from the leading edge of the TOP wing
Control Throws Elevator, Up and Down: 5/8" (11mm) Rudder, Left and Right: 3/4" (20mm)

This products has to be build, it is not ready yet

The kit only containts the kit :

• No electronics
• No additional hardware
• No battery