• NL : Open: woensdag 19.00-20.00u
  • Check menu "Discount %" for extra discount

Krick Dumas Piper Pacer PA-20 R/C Lasercut Kit 1.016mm Span # DS1811 *

€106.00

EAN 4025792134135

Piper PA-20 Pacer Park Flyer Kit vrom DUMAS
Here is our new model of a Pacer, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.

Kit features:
Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue

This is the radio controlled, electric powered Dumas Piper PA-20 Pacer Park Flyer Kit.


FEATURES

Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending


INCLUDES

All balsa, lightweight colored (black, white and red) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, one 3/4" (19mm) lightweight plastic tail wheel, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, acetate sheet for windows


REQUIREMENTS

GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 9x7 prop, GWSQ2019
Building and field equipment


SPECIFICATIONS

Length: 27" (686mm)
Wingspan: 40" (1016mm)
Wing Area: 272 sq.in. (17.57 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side
Control Throws:
Elevator, Up and Down: 9/16" (14mm)
Rudder, Left and Right: 15/16" (23.5mm)

 

This products has to be build, it is not ready yet

The kit only containts the kit :

  • No electronics
  • No additional hardware
  • No battery