• NL : Open: woensdag 19.00-20.00u
  • Check menu "Discount %" for extra discount

Robbe CALIMA PNP HIGH PERFORMANCE GLIDER + 4-FLAP WINGS +servo's 3.800mm Span # 2640 *


EAN 9010189150312

The CALIMA is the new thermal and all-round giant at Robbe. It has various attachable wing- or tiplets and is therefore easily variable in its wingspan (3800/4300 mm).

It can thus be adapted to different conditions and requirements of the pilot. The pendulum elevator is simply held in place by magnets on the fuselage on the connector. The PNP version comes with pre-installed servos, electrical connectors and original multilocks for wing protection. The flight characteristics can be described as extremely smooth.

The CALIMA can be flown as a slow thermal sniffer or as an allrounder with a little more speed. The fully covered wings are made of styrofoam, fibreglass layers, abachi planking and a carbon fibre reinforced spar. The ratio of weight and strength has been optimally achieved. The CALIMA is suitable for beginners as well as for advanced model pilots.

- four-part, ready to use Oracover covered Styro/GfK/Abachi surface with steel plug
- continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
- built-in digital Robbe servos with ball bearings and full metal gearbox (PNP only)
- complete wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP only)
- ready ironed rudder flaps with mounted rudder horns
- painted GRP hull with built-in wooden bulkheads and CfK reinforcements
- powerful Ro-Power 4226 570 K/V external rotor, optimised for 4S (PNP only)
- large canopy for easy battery change
- already hinged rudder
- Prefabricated rudder linkages with linkage parts from German production
- pre-cut servo well and linkage covers
- anodised aluminium spinner with straight middle part (PNP only)
- high strength carbon fibre propeller 14x8" (PNP only)
- modern, highly visible design


Box contents

- Model CALIMA ARF, ready covered with Oracover
- lacquered GfK/CfK fuselage
- Elevator made of balsa with CfK/magnet plug connection
- Round steel plug for main wing and extension wing
- Ro-Power Torque 4226-570 built-in engine
- 6x FS 270 MG servos built-in
- Turbospinner 45mm mounted
- Folding propeller 14x8" mounted
- extension cord
- Small parts (rudder horns, rods, fork heads, covers, etc.)
- Instructions in German/English/French

Flying weight: 4700 grams

Motor included : RO-POWER TORQUE 4226-570 


Required : not included :

Lipo :4-5S/4000-5000mAh LiXX


If you have any questions, please contact RCWebshop.eu