• NL : Modelbouwwinkel Venlo (NL) open zaterdag 9.00-12.00 uur
  • Check menu "Discount %" for extra discount

Aeronaut Pilot pilot boat # 304600 **

€199.00
EAN 4012230105413
 
Difficulty level construction: 3/5 (advanced)
Model version : Complete kit
Material hull: plastic
Length: 715mm
 
Pilot pilot boat crowd

Pilot is a free replica of a modern 20m pilot boat, which can be found on the Baltic and North Sea, for example. Boats of this type are very manoeuvrable and also very fast at around 25-30 knots. Their job is to bring the pilots safely to the big ocean liners in all weather conditions. With this model kit, both driving characteristics and driving behavior have been largely adopted. It is built on a modern hull of a planing boat as a hard chine and, like the originals, is also very manoeuvrable and, with the appropriate drive equipment, also very fast. In the space behind the steering position there is space for several pilots to be brought to their workplaces with an exit. The properties and driving behavior were incorporated into the model as far as possible. The model was built on a modern planing boat hull, is very fast and manoeuvrable. It is made of plastic as a hard chine. All ABS parts are laser cut and can be glued together immediately after they have been put together. The hull will be built on a Depron slipway. It is driven by two electric motors. The drives can be controlled individually (2 x Multi 25 controllers) or together via a Multi 40 controller. It is controlled by two rudder systems. The wheelhouse is completely expanded. The etched parts of the dashboard allow the many fittings to be illuminated. All lamps of the model can be illuminated with 3mm LEDs. The two front headlights are very bright and give the model a striking appearance with the black rubbing strip. The searchlight is made of etched parts and is fully movable. The reflector and the LEDs are matched to each other and have enormous luminosity and light bundling. The model can be expanded according to your own ideas. There is enough space in the fuselage for your own special functions such as aileron, light or sound.

The model kit contains: All laser-cut ABS parts required for construction, Depronhelling, fittings, rubbing strips, ship shafts, oars, as well as the reflectors and LEDs for the headlights. The elaborate etched parts set made of nickel silver also included in the kit contains over 100 parts. This includes the stanchions, headlights, movable door hinges, the dashboard instruments and much more.

scale 1:25
Length [mm] 715
Width (mm] 200
Weight [g] 2400-3000

This is a kit and had to be build completely, there is no extra hardware and electronics in the kit other then mentioned above.

Excluded for instance :

  • Motor
  • ESC (Electronic Speed Controller)
  • Radio
  • Servo's
  • Battery
  • Reciever
  • Prop
  • Paint, glue etc

 

Needed to complete :

Advisable to use  / don't forget :