• NL : Modelbouwwinkel Venlo (NL) open zat 9.00-12.00 uur vrijdag 15.30-17.30u
  • Check menu "% Discount" for extra discount
Home » Aeronaut Plane Quido e-flight module kit 1.070mm Span # 130300 ***

Aeronaut Plane Quido e-flight module kit 1.070mm Span # 130300 ***

€49.00
EAN 4012230111827
 
Difficulty level of construction: beginners
Model version: wooden kit
Demand to fly: beginners
 
Product type: glider models, e-glider models

Quido is a kit of a small electric airplane model that fits in every trunk. The individual parts are largely prefabricated from balsa and must be assembled using the enclosed assembly instructions. The rear fuselage consists of a single carbon fiber tube that makes the entire model lightweight. The tail unit is firmly glued to the fuselage and cannot be removed, which is not necessary given the compact size. The wing is built in one piece and attached to the fuselage with rubber rings. This ensures quick and easy assembly during flight preparation, and in the event of a rough landing, the surfaces on the fuselage are shifted or become detached from the fuselage without damage. The wings and tail units are covered with iron-on film, which the model maker applies at his own discretion and taste. Quido is suitable for model builders who have already made their first experiences with a wooden kit of our free-flight models (e.g. Lilienthal 31/32) and is an ideal introduction to RC model flying. The model kit contains all the wooden parts required to build the fuselage and wings, a carbon fiber tube for the rear fuselage section, articulations and small parts, as well as detailed assembly instructions. Suitable drives are external rotor motors with rear mounting with an output of 100-150 watts at 2s Lipo. The model kit contains all the wooden parts required to build the fuselage and wings, a carbon fiber tube for the rear fuselage section, articulations and small parts, as well as detailed assembly instructions. Suitable drives are external rotor motors with rear mounting with an output of 100-150 watts at 2s Lipo. The model kit contains all the wooden parts required to build the fuselage and wings, a carbon fiber tube for the rear fuselage section, articulations and small parts, as well as detailed assembly instructions. Suitable drives are external rotor motors with rear mounting with an output of 100-150 watts at 2s Lipo.

Span [mm] 1,070
Length [mm] 850
Weight [g] 450
Wing area [dm²] 21.3
Wing loading [g / dm²] 21
 
RC functionsElevator, rudder, motor control