{"product_id":"b2b_bsi210","title":"Finish Cure 20Min Epoxy 368g (13 oz)","description":"\u003cp\u003eFinish-Cure 20 min. constitutes a great low odor substitute for polyester resins and can be used to laminate fiberglass cloth over a wooden substrate or indeed be applied on it’s own to form a finish coat that can accept further primer and finish coats. Finish-Cure is the easiest of all the epoxies to sand and is ideal for the sheeting of foam core wings. For very well results, Finish-Cure should be heated to a temperature above 29˚C (85 ˚F) for applying lightweight fiberglass. Lay cloth on balsa first, then brush on Finish-Cure, when fully\u003cbr\u003esaturated, go over the surface with a heat gun and then squeegee off excess epoxy with a stiff piece of card (a playing card from an old deck does the job well). Heat and remove excess several times for a lightweight finish. If room temperature is below 21˚C (70 ˚ F) use a heat gun on the surface several times for the next 2 hours. When dry lightly sand then fill surface with a low weight spackling compound, scrapping off excess with some card. Sand to a smooth finish ready for primer. For heavy weight fiberglass apply the epoxy before and after laying down the cloth. Finish-Cure takes 8 hours to fully cure.\u003c\/p\u003e\r\n\u003cp\u003eApplication chart\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBalsa wood (**)\u003c\/li\u003e\r\n\u003cli\u003eHard wood (**)\u003c\/li\u003e\r\n\u003cli\u003eFiberglass (***)\u003c\/li\u003e\r\n\u003cli\u003eWhite foam (**)\u003c\/li\u003e\r\n\u003cli\u003eLaminating (***)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWater-resistant (***)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"BSI","offers":[{"title":"Default Title","offer_id":51966667981147,"sku":"BSI210","price":59.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/7348\/6171\/files\/BSI210.jpg?v=1767036944","url":"https:\/\/www.rcleo.com\/products\/b2b_bsi210","provider":"RCLeo.com","version":"1.0","type":"link"}