1
/
von
6
Robbe Modellsport COBRA 3-axis version wooden attachment with flaps "Made in Austria" Retro-Line
Robbe Modellsport COBRA 3-axis version wooden attachment with flaps "Made in Austria" Retro-Line
Robbe Modellsport
SKU:2737
Normaler Preis
€199,99 EUR
Normaler Preis
Verkaufspreis
€199,99 EUR
Inkl. Steuern.
Nicht vorrätig
Anzahl
Verfügbarkeit für Abholungen konnte nicht geladen werden
General:
The „COBRA“ # 2736 and # model is based on the Robbe „COBRA“ model from the 1970s.
It has been carefully modernized without disturbing the overall character of the original model. As was the case back then, the latest version is also a classic wooden kit, with wings constructed from ribs. The design is such that the construction of the model does not pose any major problems even for less experienced model builders.
Only version # 2737 with ailerons and flaps is more complex and elaborate due to the additional control surfaces and the installation of the wing servos.
# 2736 2-axis version controlled only by elevator and rudder:
This version is ideal for beginners in model flying who would like to build a model aircraft themselves. The flight characteristics are exceptionally good-natured. Its strength lies in relaxed, extended thermal flights. Even the more experienced pilot will appreciate the model as an excellent after-work model.
The recommended motorization with the RO-Power 2828-1350KV # 5818 in conjunction with a 2S/1300mAh (# 7332) battery and a 10x6“ propeller is easily sufficient for several climbs and an extended motor run time.
Spinners with a diameter of 32-35mm fit well to the fuselage contour. We also recommend 2 FS 151 (# 9122) or FS 166 (#9123) ROBBE servos.
#2737 3-axis version has a significantly modified wing, which is equipped with ailerons and flaps. Here, the more advanced model builder/pilot will get a very good-natured but nevertheless agile and thermic strong model, which due to its wider range of applications is ideal for slope soaring and sporty flights in the plain.
With the recommended RO-Power 2837-1100KV (#5819), a 3S 1300-1800mAh battery (e.g. # 7356) and a 9x7“ propeller, the model achieves impressive climb and flight performance, which more than do justice to the sportier variants of the „COBRA“ model.
Spinners with a diameter of 34-35mm fit well to the fuselage contour.
We recommend 2 FS 151 (# 9122) or FS 166 (#9123) ROBBE servos for elevator and rudder, and 4 FS 29 X (# 9126) Robbe servos for ailerons and flaps.
2737
Vollständige Details anzeigen
The „COBRA“ # 2736 and # model is based on the Robbe „COBRA“ model from the 1970s.
It has been carefully modernized without disturbing the overall character of the original model. As was the case back then, the latest version is also a classic wooden kit, with wings constructed from ribs. The design is such that the construction of the model does not pose any major problems even for less experienced model builders.
Only version # 2737 with ailerons and flaps is more complex and elaborate due to the additional control surfaces and the installation of the wing servos.
# 2736 2-axis version controlled only by elevator and rudder:
This version is ideal for beginners in model flying who would like to build a model aircraft themselves. The flight characteristics are exceptionally good-natured. Its strength lies in relaxed, extended thermal flights. Even the more experienced pilot will appreciate the model as an excellent after-work model.
The recommended motorization with the RO-Power 2828-1350KV # 5818 in conjunction with a 2S/1300mAh (# 7332) battery and a 10x6“ propeller is easily sufficient for several climbs and an extended motor run time.
Spinners with a diameter of 32-35mm fit well to the fuselage contour. We also recommend 2 FS 151 (# 9122) or FS 166 (#9123) ROBBE servos.
#2737 3-axis version has a significantly modified wing, which is equipped with ailerons and flaps. Here, the more advanced model builder/pilot will get a very good-natured but nevertheless agile and thermic strong model, which due to its wider range of applications is ideal for slope soaring and sporty flights in the plain.
With the recommended RO-Power 2837-1100KV (#5819), a 3S 1300-1800mAh battery (e.g. # 7356) and a 9x7“ propeller, the model achieves impressive climb and flight performance, which more than do justice to the sportier variants of the „COBRA“ model.
Spinners with a diameter of 34-35mm fit well to the fuselage contour.
We recommend 2 FS 151 (# 9122) or FS 166 (#9123) ROBBE servos for elevator and rudder, and 4 FS 29 X (# 9126) Robbe servos for ailerons and flaps.
2737
