• NL : Open: woensdag 19.00-20.00u
  • Check menu "Discount %" for extra discount

Robbe MISTRAL 2.0 PNP STYRO/GRP/ABACHI WINGS 2.000mm Span # 2644 *****


EAN 9010189153979

Pre - order, expected in 1-2 months

The MISTRAL now has a high-strength, abachi-planked wing in the V2 version. Although this increases the weight by approx. 150g compared to its predecessor, which has been tried and tested hundreds of times, it gives the MISTRAL V2 significantly more robustness in everyday use.
In flight, the MISTRAL V2 gets even more pull through and the hotliner-typical characteristics come to the fore much better.
The MISTRAL V2 is a multi-talent and the absolute fun model for the end of the working day! Thanks to the modified RG-15 profile and the built-in Ro-Power BL drive, vertical climbs are possible without any problems and are therefore reminiscent of a hotliner. Of course the MISTRAL V2 is not the same as a full-GfK Hotliner, but that was not the goal.
The eye-catching and modern neon-coloured hotliner design should help you to recognize the model well in the sky at any time and to distinguish it from other models in the air and on the ground.

Let yourself be impressed by the high speed range of the MISTRAL V2. A landing with flaps set is always a pleasure and absolutely stress-free, which is why the model is also suitable for advanced pilots.

The MISTRAL V2 is ready to fly in just a few steps. In addition to the built-in Ro-Power 3522 external rotor, the model also contains six ready-to-use digital ROBBE servos with metal gears. The wiring is also ready. The prefabricated and cut to length linkage rods only have to be hooked in and adjusted accordingly.

two-part, Oracover covered Styro/GfK/Abachi surface with CfK plug connection
-continuous sandwich beam (coal-pine coal) for maximum bending stiffness
-built-in digital Robbe servos with ball bearings and solid metal gears
-ready wiring of all servos with MPX 6-pin connectors between wing and fuselage
-ready ironed rudder flaps with mounted rudder horns
lacquered GRP hull with built-in wooden frames and CfK reinforcements
-Powerful Ro-Power 3522 1000 K/V external rotor, optimized for 4S
-Large canopy for easy battery replacement
-already ready hinged rudder
-Prefabricated rudder rods with articulated parts made in Germany
-ready-cut servo shaft and linkage covers
-anodised aluminium spinner with straight centre section
-high-strength carbon fibre propeller 11x8
-modern, well visible design

Box contents

- Model MISTRAL V2 incl. two-piece Styro/GfK/Abachi surface covered with Oracover
- CfK Surface plugging
- lacquered GRP hull with CfK reinforcements
- Ro-Power 3522 1100 K/V built-in
- 6x FS 155 BB MG Digital Servos integrated
- Carbon folding propeller 11x8"
- Turbospinner 38mm mounted
- Cabling with MPX 6-po. Plug connections
- small items
- Assembly instructions in German/English

Length : 1.170mm

Flying weight : 1.780 gram

Included :

Motor RO-Power 3522 (1000 kV) 


Required / not included : 

Lipo:4S/2000-2500mAh LiXX


If you have any questions, please contact RCWebshop.eu