• Mail for shipment questions : RCwebshop.eu@gmail.com
  • Worldwide shipping
Sold out

Aeronaut Plane POWERFLY e-glider 1.935mm Span # 132000 **

€159.00 €151.00
Aeronaut Plane POWERFLY e-glider 1.935mm Span # 132000 **
Sold out
EAN 4012230077239
 
Difficulty level of construction: beginners
Model version: ARC model
Demand to fly: beginners
 
Product type: E-glider models
 
 

Powerfly is a further development of the Panafly 400 G. The reason for the introduction of this model lies above all in the outstanding flight performance of its predecessor. The use of new motors, gears and propellers, a voluminous, light GRP fuselage, which also enables the installation of 500 and 600 motors and the battery change through the removable canopy, significantly expand the range of applications for the newcomer. The fuselage was lengthened by 15mm, the wing was taken over without changes. It is now ready to build, delivered in 4 parts, as well as the elevator and rudder units. The construction costs have thus been reduced considerably. Aerodynamics almost without compromise - e.g. the profile of the wing. It is provided with the Selig-Donovan SD 3021 profile. The basic profile was stretched from a thickness of 9.5% to 8% (wing tip). This reduced the critical RE number in this area and, in conjunction with the edge arches, the induced drag. It goes without saying that such a finely profiled surface in the nose area must be planked - with an extension of 12 also for strength. In terms of flying, Powerfly is a treat. Completely self-stable? Sucks? the weakest thermal, a show near the ground. ?On the route? he takes on quite high speed without a noticeably increased sink. Wind speeds of 6-7 m / sec don't bother him. To ensure that the model comes back safely from great heights, the installation of airbrakes is highly recommended. These have been extensively tested and are drawn in in detail in the construction plan and described in detail in the construction instructions. They are controlled by two 9 gram servos and "V" cables. The model is controlled via rudder and elevator, the engine via a small tachometer with BEC (at least 1A!). The two-part wing is brought together with a steel pin Ø 4 mm, and it is mounted on the fuselage using two dowels and two plastic screws. The quickly removable canopy ensures free access to the motor, controller and changing the battery. The jury of the “International Best RC-Glider of the Year Award”, which gave Powerfly the coveted award for model of the year in 2000, was also impressed by Powerfly. The quickly removable canopy ensures free access to the motor, controller and changing the battery. The jury of the “International Best RC-Glider of the Year Award”, which gave Powerfly the coveted award for model of the year in 2000, was also impressed by Powerfly. The quickly removable canopy ensures free access to the motor, controller and changing the battery. The jury of the “International Best RC-Glider of the Year Award”, which gave Powerfly the coveted award for model of the year in 2000, was also impressed by Powerfly.

Weight [g] 1050
Length [mm] 930
Span [mm] 1935
Wing area [dm²] 30.98
 
RC functionsElevator, rudder, motor control