Microaces Scrappee SAVANNAH Micro plane

€45.00

EAN 9505996733129

Microaces Scrappee SAVANNAH Micro Trainer Kit mini Plane Vliegtuig Flugzeug

What is Scrappee?

An easy to build, stable flying model kit, created as an introduction to the world of micro radio controlled aviation.

If you're looking for a way into a fantastically absorbing hobby

The Scrappee has been designed from the ground up by Microaces to satisfy a number of goals:

  • An easy, quick build kit that's also tough AND repairable.
  • The ultimate introduction to building strong, lightweight micros using modern materials.
  • An ideal platform for learning to fly micro radio control.

However, the Scrappee is not exclusively for the beginner. Because of its wide speed envelope, light weight and cleaned lines it can climb fast, loop big and turn quickly. Indoors and out, even in a breeze, its a great performing airplane that can be enjoyed by seasoned modelers too.

Scrappee SAVANNAH

Sporting a very distinctive livery and safari branding, the Savannah is a made for tracking and observing big game on the African plains or a quick fly around the local park!

Supported Build

Scrappee kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model. 

Microaces will also be producing video support for the build that will be available to all once Scrappee becomes available.

Assembly Guide

Click on the booklet to download!

Specification

Microaces Scrappee Savannah

 

AirframeSportControlsRudder, Elevator, ThrottleLength330mm / 13"Wingspan430mm / 17.0"Wing Area3.68 sq dm / 57 sq in.Flying Weight.37 - 39g/1.3 - 1.4ozWing Load~10.3 g/sq.dm / 3.4 oz/sq.ft.Recommended
Receiver

Parkzone PKZ3351, PKZ3352 or PKZUA1151 

Microaces AIO 5 Channel Receiver

Rec. Motor / G.Box

Microaces Motor Gearbox with STANDARD prop shaft

OR Parkzone PKZ3624 

Rec. Battery

1 Cell Lipo. 130-180mAh 1S 25C with UM connector

E-Flite EFLB1501S45 works well!

Rec. PropGWS 4530Skill Level - BuildBeginnerSkill Level - PilotBeginnerTools requiredScalpel, 180 Grit sandpaper or stick, straight edge, tweezersRec. AdhesiveUHU por

 

 

Kit Content

 

SHEET PARTS2mm laser cut Depron Airframe sheet1mm printed & laser cut Depron fuselage sheet1mm printed & laser cut Depron flight surfaces sheet x 2200 micron printed & laser cut polypropylene sheetpolyester sticker sheetLOOSE PARTS0.8mm laser cut plywood motor mountTwo 30mm Ø Sponge rubber tires + 3D printed hub assemblyFour 3mm & two 4mm Ø noedymium magnets2mm Ø carbon fibre rod axlepre-shaped piano wire elevator & rudder control rods