SKYRC eN18 Charger (NiMh & NiCd 4-8S - 1A) with Tamiya plug # SKY100184-02


Model: SKY100184-02

SkyRC eN18 is more than just a peak charger - it's a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs.

Compact but versatile

SkyRC eN18 is more than just a peak charger, it's a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs. This is possible because the SkyRC eN18 offers voltage ranging from 4.8 to 14.4V at 1.2amp. You can charge 6-8 cell NiMH battery packs as found in most electric cars, trucks and buggies. With the 1.2 amp charge rate, you can safely fast charge any 4-5 cell nitro car NiMH receiver's pack.


Delta-V peak detection

With the Delta peak detection circuitry, the SkyRC eN18 allows your batteries to reach their full capacity when charging, so you can get the most power and run time from your batteries; It achieves this by using peak detection circuity that monitors the voltage of the battery pack while it's being charged and automatically shuts the charger off when the pack's voltage peaks and then starts to drop. This is in contrast to a timed charger, where you often end up with a battery pack that's not fully charged.


Plug and charge

eN18 will start charging on the fly once the correct battery is plugged.

Stabilized output for maximum safety

With the stable pulse charge, eN18 pumps a fixed 1.2A current to charge your battery reliably. All the chargers have passed the rigorous burn-in process to ensure they are durable enough to withstand use cycles and other operating conditions.


Trickle charge: optimize the battery

Like all batteries to self-discharge, NiMH batteries even have a relatively high self-discharge rate of about 1% per day. Trickle charging can keep NiMH batteries in optimal condition to replenish the charge that is continually draining off.


  • Delta peak detection circuitry
  • Compact and lightweight
  • NiMH compatible
  • Maximum output 1.2A
  • Short-circuit protection
  • Reverse connection protection
  • Universal voltage input
  • Accurate voltage
  • High reliability
  • Lower operating temperature
  • High-efficiency and energy-saving
  • High-temperature and flame retardant casing material
  • 100% environmentally friendly materials, no toxic substances


  • Dimensions: 85 x 50 x 54mm
  • Weight: 120g
  • Input: AC100V - 240V 50/60Hz
  • Output voltage: 4.8 - 14.4V
  • Output current: 1.2A
  • Output power: 18W max.
  • Output cable length: 70cm

Inhoud kit

  • eN18 charger
  • Tamiya plug